Configuration Types; A - Mono; B - Stereo; C - Double Column Stereo - dBTechnologies ES 1203 Manual Del Usuario

English

2. CONFIGURATION TYPES

• Installation types other than those illustrated here are not allowed.
• Never hang the subwoofer by its handles
• Always check that placement is stable and the installation is not a hazard to people, animals or
things.

A - MONO

In the MONO configuration, the double head is mounted on the
subwoofer using a telescopic pole with adjustable height.
CAUTION!
• In this configuration, if the distance from the top of the
subwoofer to the bottom of the lower top is greater than
70 cm, you must also anchor the system to the ground with
straps and suitable mechanical means (not supplied).

B - STEREO

In the STEREO configuration, use two tripods with a 35 mm
diameter pole (SK36 TT kit accessory) as shown in the figure.

C - DOUBLE COLUMN STEREO

In the DOUBLE COLUMN STEREO configuration, use two MONO
systems connected together as explained in the CONNECTING THE
OUTPUT FROM ONE SYSTEM TO ANOTHER paragraph.
CAUTION!
• In this configuration, if the distance from the top of the
subwoofer to the bottom of the lower top is greater than
70 cm, you must also anchor the system to the ground with
straps and suitable mechanical means (not supplied).

WALL MOUNTING

For each of the configuration types A, B or C illustrated above, you can use the optional WB-44 (wall mounting
brackets kit) accessory to mount the system tops on the wall as part of a fixed installation.
See the ACCESSORIES chapter for further information.
ES-1203
MAX 70 cm *
MAX 70 cm *
Cod. 420120253 REV. 1.0
41