Nevir NVR-9545CVT Manual De Instrucciones página 19

When the desired room temperature has been reached，
the thermostat knob should be turned slowly anti-
clockwise until is heard a 'click' on the thermostat and the
lights on the elements are switched off. .After this the
heater will keep the air temperature in the room at the set
temperature by switching on and off automatically.
This model also incorporates an internal fan，which can
be switched on independent of the heating elements. To
use the fan, please use the button highlighted in below
picture The fan will only operate with the thermostat in the
"on"position and can be used when the heating elements
are "on" to blow warm air into the room.
In warm conditions the fan can be used with the heating
elements "off" to blow cool air into the room.
(Only Model NVR-9546CVTT)
19