Controls And Features - Fender FIGHTER 10 Manual De Instrucciones

Thank you for choosing the Fender Fighter series two-way powered
loudspeaker. Designed to provide exceptional fidelity, reliability and
ease of use, it delivers maximum flexibility, including three input
channels with two-band EQ (for mic, line and auxiliary sources),
Bluetooth audio streaming and durable styling. Other premium
Fighter features include:
• 10" (Fighter 10) and 12" (Fighter 12) low-frequency speakers
• 1" titanium horn-loaded high-frequency compression driver
• 1,100-watt class "D" power amplifier with active crossover
A. CHANNEL TREBLE CONTROL: Treble frequency boost/cut; one for
each of the three channels. Control is "flat" in center position (no
effect on channel sound).
B. CHANNEL BASS CONTROL: Bass frequency boost/cut; one for
each of the three channels. Control is "flat" in center position (no
effect on channel sound).
C. CHANNEL VOLUME CONTROL: Adjusts volume of each channel
relative to volume of other channels.
D. 1/4" INPUT: For connection of line-level input sources to
channels one and two (left and center channels).
E. LINE/MIC INPUT SWITCH: Selects input sensitivity for channels
one and two (left and center channels). "Out" position is for line-
level input sources such as mixers, keyboards and amplifier line
outputs. "In" position is for dynamic microphones.
F. XLR INPUT: Input for connection of microphones and line-level
input sources to channels one and two (left and center channels).
G. LOOP OUTPUT: XLR output for connection to additional Fighter
speakers or external subwoofer. Provides full-range signal for all
three channels.
TYPE
POWER AMP
FREQUENCY RESPONSE
MAXIMUM SPL
SPEAKERS
NOMINAL COVERAGE
FUSE
DIMENSIONS AND WEIGHT
2
Fender Fighter™ Powered Loudspeakers

Controls and Features

Specifications
5205
1,100 watts class "D"
Fighter 10: 55 Hz–20 kHz
130 dB
Fighter 10: One 10" woofer, one 1" compression driver
Fighter 12: One 12" woofer, one 1" compression driver
Fighter 10: 90 degrees horizontal, 35 degrees vertical
Fighter 12: 90 degrees horizontal, 30 degrees vertical
T4AL 250V (100V-120V)
T2AL 250V (220V-240V)
Fighter 10: Width: 12" (30.5 cm)
Fighter 12: Width: 13.5" (34.3 cm)
Product specifications subject to change without notice.
• Dynamic limiting circuitry for continuous headroom monitoring
and seamless system gain adjustment for maximum clean power
without distortion
• Dual tuned-port system for extended bass response
• Loop output with subwoofer crossover switch
• Rugged, compact and lightweight wood enclosure with vinyl
covering, perforated steel grille, durable protective corners and
dual rear handles
• 35 mm pole-mount socket
H. AUX/BT INPUT: Provides 3.5 mm connection for auxiliary devices
such as MP3 players, computers and other line-level stereo sources.
Defeats Bluetooth module when in use.
I. BT PAIR SWITCH: Activates Bluetooth module for pairing with
external devices. After a device is paired, unit will search for device
when power is on; Bluetooth module will enter "standby" mode if
no connection is established after 15 minutes.
J. MASTER VOLUME CONTROL: Adjusts overall volume level of all
three channels.
K. FULL RANGE/SUBWOOFER SWITCH: "Out" position is for full-
range frequency response. "In" position activates internal high-
pass speaker crossover, limiting lower bass frequencies to Fighter
speaker when using an external subwoofer.
L. POWER INDICATOR LIGHT: Illuminated when unit is on.
M. POWER CORD: Connect to a grounded outlet in accordance with
the voltage and frequency specifications.
N. POWER SWITCH: Turns unit on and off.
Fighter 12: 50 Hz–20 kHz
Height: 20.5" (52 cm) Depth: 12.9" (32.7 cm)
Height: 22.5" (57.2 cm) Depth: 15.1" (38.4 cm)
Weight: 28 lbs. (12.7 kg)
Weight: 32 lbs. (14.5 kg)