Troubleshooting; Care And Maintenance - Allen + Roth F12-B-031-071A Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

OPERATING INSTRUCTIONS
10. Up: Use to turn up the heat, brightness of flame or
timer.
11. Buttons on the remote control (P) have the same
functions as those on the control panel except Heater
and Child Lock. Heater on remote can perform all
the functions except it can not switch the temperature
display from Fahrenheit to Celsius. For Child Lock, it
will quickly activate and deactivate immediately after
clicking.
The remote control (P) comes preassembled with a
correct battery, but you must remove the insulation
plastic film form the battery before operation.

CARE AND MAINTENANCE

• Keep the fireplace in a climate-controlled environment. Extreme temperature and humidity changes
can cause warping, shrinking, and/or splitting of wood.
• Use a clean dry cloth to clean the fireplace.
• To remove fingerprints or other marks from glass window of electric insert, use clean damp cloth.
• Clean metal surfaces of electric insert with a clean damp cloth making sure not to push dust or
debris into any air intake or exhaust vents.
• Do not use abrasive cleaners or spray liquids on any part of the appliance.
• Periodic cleaning/vacuuming of the fan/heater unit is strongly recommended to ensure that no dirt
or foreign objects build up.
• Battery Replacement: Use one lithium coin cell battery (size CR2025) for the remote control.
10
11
Lowes.com/allenandroth
14

TROUBLESHOOTING

PROBLEM
1. Dimmer control button
2. LED strip not
Simulated flame
effect is dim or not
3. "Flame wand" has come
present.
4. "Flame wand" motor is
1. The overheat protection
The appliance
turns off and will
not turn back on.
2. House circuit breaker
The appliance does
The overheat protection
not turn on when
device in the appliance
the button is pushed
has been triggered.
to "ON".
Remote control
does not work.
WARRANTY
The manufacturer warrants this item against defects in materials and workmanship for a period of one
(1) year from the date of original retail purchase. This warranty applies only to the original purchaser.
This warranty does not apply to any damage on the product by accident, misuse, or modified,
improper installation or by affixing accessories not produced by the manufacturer. The manufacturer
is not accountable whatsoever for product installation during the warranty period. There is no further
expressed warranty. The manufacturer shall not be legally responsible for incidental, consequential
or special damages arising at or in connection with product use or performance except as may
otherwise be accorded by law. The manufacturer disclaims any and all implied warranties.
®
POSSIBLE CAUSE
SOLUTION
1. Push flame button to increase light.
is set too low.
2. Contact customer service center.
3. Remove screws holding back panel
functioning.
in place and remove back panel.
Secure end of "Flame wand" back
loose from bracket.
into the support bracket.
4. Contact customer service center.
not functioning.
1. Turn all controls off, unplug the
device in the appliance
appliance, allow the insert to cool
has been triggered.
down for at least 10 minutes, and
then plug in and restart.
has been tripped.
2. Reset house circuit breaker.
Turn all controls off, unplug the
appliance, allow the insert to cool down
for at least 10 minutes, and then plug
in and restart.
Replace all batteries in the remote
Low batteries.
control.
Lowes.com/allenandroth
15
®

Publicidad

Tabla de contenido
loading

Tabla de contenido