SPECIFICATIONS / SPEZIFIKATIONEN / CARACTÉRISTIQUES / ESPECIFICACIONES / SPECYFIKACJE /
SPECIFICHE
EN
Model Name:
Product Type:
Type:
Inputs:
Input Connections:
Input Impedance:
Input Sensitivity:
Max. Input Level:
Protection Circuits:
Headphone Outputs:
Headphone Output Connectors:
Power Output:
Minimal Connected Impedance per Channel:
Frequency Response:
THD @ 1 kHz Sinus:
Controls:
Indicators:
Power Supply:
Operating Voltage:
Power Consumption:
Housing Material:
Housing Surface:
Housing Colour:
Dimensions (W x H x D):
Weight (without battery):
Accessories (included):
DE
Modellbezeichnung:
Produktart:
Typ:
Eingänge:
Eingangsanschlüsse:
Eingangsimpedanz:
Eingangsempfindlichkeit:
Max. Eingangspegel:
Schutzschaltungen:
Kopfhörer-Ausgänge:
Kopfhörer-Ausgangsanschlüsse:
Ausgangsleistung:
minimale angeschlossene Impedanz pro Kanal:
Frequenzgang:
THD @ 1kHz Sinus:
Bedienelemente:
14
LDHPA1
headphone amplifier
1-channel stereo
Main Input (Stereo), 1 x Aux In (Stereo)
XLR-F (L + R Input, balanced),
3.5 mm stereo jack (Aux In)
6 kOhm (XLR In), 10 kOhm (3.5 mm jack)
3dBu (XLR In), -6 dBV (3.5 mm jack)
16 dBu (XLR In), 7 dBV (3.5 mm jack)
Audio Limiter, Max. Input leveling, Power-OFF Mute-Relay
1
3.5 mm stereo jack
2 x 1.65 Vrms / 1% THD @ 33 Ohm Load
16 ohms
20 Hz - 40,000 Hz
0.04%
Power/Volume,
Balance L/R,
Stereo/Mono (Focus) -switch,
Signal (green) / Peak (amber),
battery (low battery: red) / Power LED (power ON: green)
9 V block battery, DC low voltage power adapter
9 V DC
Nom. 70 mA / Max. 150 mA
plastic
soft-touch
black
80 x 42.5 x 133 mm
165 g
belt clip
LDHPA1
Kopfhörerverstärker
1-Kanal Stereo
Main Input (Stereo), 1 x Aux In (Stereo)
XLR-F (L + R Input, symmetrisch),
3,5 mm Stereo-Klinke (Aux In)
6kOhm (XLR In), 10 kOhm (3,5mm Klinke)
3dBu (XLR In), -6dBV (3,5mm Klinke)
16dBu (XLR In), 7dBV (3,5mm Klinke)
Audio Limiter, Max. Input leveling, Power-OFF Mute-Relay
1
3,5 mm Stereoklinke
2x 1,65Vrms / 1%THD @ 33ohm Load
16 Ohm
20 Hz - 40.000 Hz
0,04%
Power/Volume,
Balance L/R,
Stereo/Mono (Focus) -Schalter,