Thermostat Quick Reference; Configuration Menu - White Rodgers Blue 2 Manual De Instrucciones

THERMOSTAT QUICK REFERENCE

Before you begin using your thermostat, you should be familiar
with its features and with the display and the location and
Your thermostat consists of two parts: the thermostat cover
and the base. To remove the cover, pull it straight out from the
base. To replace the cover, line up the cover with the base and
press until the cover snaps onto the base.
The Thermostat Buttons and Switches
1
Raises temperature setting.
2
Lowers temperature setting.
3
(COOL, OFF, HEAT).
FAN switch (ON, AUTO).
4
The Display
Indicates setpoint temperature. This is blank when system
5
prevent the compressor from cycling too quickly.
"Save"
6
the configuration menu. "Save"
Flame icon
7
8
Displays current temperature.
INSTALLER/CONFIGURATION MENU
The configuration menu allows you to set certain thermostat operating characteristics to your system or personal requirements.
Menu Press
Reference Key
Number
and
2
and
and
and
4
and
and
and to change to the next menu item. To exit the menu, set the system switch to
Configuration Menu
Displayed
Press
(Factory
to select from
Default)
listed options
On
CR Cool
CL On
9
"Service"
system. It does not indicate a fault in the thermostat.
10
"Change Filter" is displayed when the system has run
for the programmed filter time period as a reminder to
change or clean your air filter.
11
indicates batteries should be replaced.
Figure 5. Thermostat display, buttons, and switches
SYSTEM
3
11
10
and buttons simultaneously. The display will show the first
or
4
"Change
4
9
8
7
Comments
"
2
5
6