Attaching The Camera To A Tripod - VAIO PCGA-UVC11A Manual De Instrucciones

Attaching the camera to a tripod

You can attach the camera to a tripod to capture images.
Notes
• Do not walk around with the camera when it is attached to the tripod. If
the camera falls, it could be damaged.
• Do not use a tripod with a screw that exceeds 0.28 inches (7 mm) in
length. If you use a tripod with a screw longer than 0.28 inches (7 mm) in
length, the camera will not be stable when it is attached, and it may be
damaged.
• When attaching the camera, first make sure that the tripod is stable, then
attach the camera so that it is horizontal. If the camera is tilted, it could
fall.
• When adjusting the position of the camera, protect it from falling by
supporting both the tripod handle and the camera with your hands.
• When adjusting the camera angle, focus, or positioning of the USB cable,
make sure you support the camera with your hand.
• When operating the capture button on the camera, make sure you support
the camera with your hand.
• Make sure you use a tripod that is big enough to support the weight of the
camera without tipping.
1
Attach the tripod screw hole on the mounting adapter to the
tripod screw.
2
Attach the camera to the mounting adapter.
3
Connect the camera USB cable to the computers USB
connector.
Refer to the manuals provided with your computer to locate the
position of the USB connector on your computer.
Tripod screw
Continued on next page
GB
19