Important Notice - Metronic TouchBox 8 Manual De Instrucciones

Receptor satélite dvb-s hd con puerto usb
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Important Notice

The inside of your TouchBox8 contains components submitted to high tension. Never
open the product, even after having removed the mains cable. In general, audio
video products are not related to the earth so you can actually feel electric waves
(which are not dangerous) by touching the two products simultaneously (or one
product and the antenna cable). We advise that you plug the products in the mains
EN
after having made all the connections.
To clean the box or its remote, do not use any solvent or detergent. A dry or slightly
humid cloth is all you need to remove the dust.
Do not install the box near other electric products. Find a spacious area and do not
place anything on top of the box. The box must never be exposed to water, even
water splashing, and you must never leave objects filled with liquid, such as vases,
on top of the box. Never place the box on another product, as the overheating would
make the components age prematurely. If you are subject to a storm, unplug all
your audio video products from the mains: the storm could cause damages that the
warranty would not cover.
The remote needs two AAA 1.5V batteries. Please respect the environment and the
law and do not throw used batteries with domestic rubbish. Take them back to your
point of sale where you will find containers for used batteries.
The installation and usage of the product is based on pre-programmed channels. If
you have a problem with a channel you should look for a specialised magazine that
will advise if this specific channel is sometimes transmitted clearly. Operators often
change the channels characteristics without warning.
Your TouchBox8 is DiSEqC 1.2. compatible so it can control any DiSEqC 1.2. motor.
In the case of a motorised DiSEqC 1.2. installation, we advise that the motor is
installed in an accessible area (avoid chimneys for example). Indeed, a motor might
need to be re-screwed, oiled ... For your information, the DiSEqC 1.2. standard is a
brand from Eutelsat.
If you only have one satellite receiver, you will not be able to view a satellite channel
different from the one that you are recording. We also advise you to keep your ter-
restrial antenna if you have one. If necessary to install a motor, please contact our
technical service: soporte@metronic.com
1
Technical service: soporte@metronic.com

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

441371

Tabla de contenido