EURO-PRO F1052 Manual Del Usuario página 5

OPERATING INSTRUCTIONS
The following cooking times reflect only the approximate time needed to fry one
basket filled only to the MAX line. The exact time may be different depending on
actual quantity, personal cooking preferences, size and thickness of pieces, etc...
Temperature Settings
In general, use lower settings for delicate foods (vegetables, fish) and higher settings
for frozen foods, French Fries and Chicken.
Food Cooking Time
French Fries 6-9 minutes
Fish Fillets 3-5 minutes
Chicken Fingers 6-8 minutes
Chicken Pieces 13-20 minutes
Fried Zucchini 3 minutes
Fried Mushrooms 3 minutes
Onion Rings 3 minutes
Donuts 3-5 minutes
Apple Beignets 4 minutes
Shrimp 4-6 minutes
Filtering & Changing The Oil
• Make sure the deep fryer is unplugged
and the oil has cooled before cleaning
or storing the deep fryer.
• The oil does not need to be changed
after each use. In general, the oil will
be tainted rather quickly when frying
food containing a lot of protein (such
as poultry, meat or fish). When oil is
mainly used to fry potatoes and is
filtered after each use, it can be used 8
to 10 times. However, do not use the
same oil for longer than 6 months.
• To filter the oil first make sure the oil
has cooled and then empty the oil from
the oil container into another container
or bottle. (Fig. 6)
Wash and dry the oil container and
basket. Refill the oil container with the
oil, pouring the oil through a wire
strainer or paper filter. (Fig. 7)
Temperature
375°F
325°F
350°F
350°F
325°F
325°F
325°F
350°F
350°F
325°F
Fig. 6
Fig. 7
7
OPERATING INSTRUCTIONS
Detachable Power Cord
Your deep fryer has been specifically
designed with your safety in mind.
EURO-PRO has incorporated a
detachable power supply cord. This
power supply cord is designed to
"Break Away" from the fryer body in the
event that the supply cord is
inadvertently pulled. This is intended to
prevent the tipping of the appliance and
hazardous spilling of hot oil.
The female receptacle portion of the
power supply cord is permanently
attached to the rear of the control
panel.
To connect the male power cord plug to
the female receptacle on the appliance,
orient the male plug so that it mates
with the female receptacle. (Fig. 8) The
male plug can only be inserted one
way. If the male plug will not go into
the receptacle on the appliance, rotate
the male plug 180°.
IMPORTANT : Should the male plug
become detached from the appliance
during use, it is important to:
1. Unplug the power cord from the wall
outlet.
2. Turn off the appliance at the control
panel.
3. Re-attach the power cord to the
appliance.
4. Re-connect to power outlet.
5. Turn the appliance back on.
Fig. 8
Cleaning Instructions
Warning:
Always remove the plug from
the wall socket before cleaning. Allow
the deep fryer and the oil to cool
completely (approximately 2 hours)
before cleaning. Never immerse the
control panel, cord or plug in water or
any other liquid.
• Follow the cleaning instructions.
(Prior to First Use)
• Never immerse the control panel, cord
or plug in water or any other liquid.
• Do not place the control panel, cord or
plug in the dishwasher.
• Clean the control panel only with a
damp cloth.
• The oil container, frying basket, lid
cover and filter can be washed in the
dishwasher.
• The body of the deep fryer can be
washed in warm soapy water. Do not
put the body of the deep fryer in the
dishwasher.
How To Reset the Deep Fryer
If for some reason the deep fryer stops
heating, the reason might be that the
safety reset switch has tripped. To
reset the deep fryer, follow the
instructions listed below:
• Push the thermostat reset button
located on the back of the control
panel with the back of a ball point
pen. (Fig. 9) The unit will beep to
indicate that it has reset.
Reset
Button
Fig. 9
8