Publicidad
Idiomas disponibles
Idiomas disponibles
• You can use the five icons (and up to 20 numbers)
to mark different locations of any kind (your favorite
fishing spot, boat loading ramp, a campsite, etc.). Be
sure you select a different icon or # to store each new
location. If you hold down MARK with a previously
used location icon still selected, you will replace that
one with your current location.
• To expand or restrict the number of "extra" locations
(numbers from 1 to 20) that are available, Press SETUP
(4) three times until the location arrow on the lower
right is highlighted. Press MARK (2), then use the
TRIP/DATA or SETUP buttons to decrease or increase
the number below the arrow (Fig. 6). Press the MARK
button to confirm and return to the Setup screen.
auTo PoWeR oFF/BackLiGHT
• Power automatically turns off after 10 minutes if no
buttons have been pressed (except in Trip mode,
described next). HOLD POWER to turn the unit off
manually.
• Press the MARK button to turn the display backlight
on. It automatically turns off after 30 seconds.
coMPaSS caLiBRaTion
• To ensure directional accuracy, hold the FishTrack out
in front of you and move it in a "Figure 8" pattern a few
times to re-calibrate the compass (Fig. 7). A compass
calibration video is available at: http://www.bushnell.
com/products/gps/instruction-videos/.
• For best results, we recommend holding the FishTrack
in a horizontal position (not tilted) during use (Fig. 8).
Fig. 6
8
Fig. 7
Fig. 8
7
Publicidad
