Husqvarna QC330 Manual De Instrucciones página 7

• Use provided cable
• Connect the battery charger to the voltage and fre-
quency specified on the rating plate. LEDs on battery
charger flash 1 time. (4)
Connect the battery to the battery charger.
The battery must be charged before using it the first
time. The battery is only 30% charged when delivered.
• Ensure that the battery is dry before it is connected
to the battery charger.
• Put the battery in the battery charger. Make sure that
the battery is connected to the battery charger. (1), (2)
• The green charging light on the charger is lit when
the battery is connected to the battery charger.
• The battery will not be charged if the battery temper-
ature is over 50 °C (122 °F). In that case the battery
charger will actively cool down the battery. When bat-
tery has been cooled down, the light will stop flash-
ing and charging procedure continue as normal (4)
• When all LEDs are off the battery is fully charged.
Press battery indicator for battery status. (7)
• When the battery is fully charged the battery charg-
er will stop charging. Remove the battery from the
battery charger when it is fully charged.
• Pull out the plug. Never jerk the power supply cable
to disconnect it from the wall socket. (3)
BATTERY HANDLING
7