Pan/Tilt Orientation; Zoom Orientation; Display Orientation - Chauvet Professional MAVERICK STORM 1 WASH Manual De Instrucciones

Operation
IP Address
In Manual IP Mode, the IP address must be assigned through the product menu. To set the IP address in
Manual IP Mode, do the following:
1. Navigate to the Network Settings
2. Use <UP> or <DOWN> to select IpAddress.
3. Press <ENTER>.
4. Set the IP address (from 000.000.000.000 to 255.255.255.255) using the menu buttons:
a. Use <LEFT> or <RIGHT> to select the byte (set of three numbers) to be changed).
b. Use <UP> or <DOWN> to increase or decrease the value.
c. Repeat until the IP address is set as desired.
5. Press <ENTER>.
Subnet Mask
In Manual IP Mode, the Subnet Mask must be assigned through the product menu. To set the Subnet Mask
in Manual IP Mode, do the following:
1. Navigate to the Network Settings
2. Use <UP> or <DOWN> to select SubMask.
3. Press <ENTER>.
4. Set the Subnet Mask (from 000.000.000.000 to 255.255.255.255) with the buttons:
a. Use <LEFT> or <RIGHT> to select the byte (set of three numbers) to be changed.
b. Use <UP> or <DOWN> to increase or decrease the value.
c. Repeat until the Subnet Mask is set as desired.
5. Press <ENTER>.
In DHCP or Static IP Mode, the IP and SubMask menu settings have no effect on the
product.

Pan/Tilt Orientation

To set whether the pan or tilt orientation is normal or inverted:
1. Navigate to the Setup
2. Use <UP> or <DOWN> to select Pan Reverse or Tilt Reverse.
3. Press <ENTER>.
4. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (normal orientation) or YES (inverted
orientation).
5. Press <ENTER>.

Zoom Orientation

To set whether the zoom goes from wide to narrow or from narrow to wide, follow the instructions below:
1. Navigate to the Setup
2. Use <UP> or <DOWN> to select Zoom Reverse.
3. Press <ENTER>.
4. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (wide to narrow) or YES (narrow to
wide).
5. Press <ENTER>.

Display Orientation

To set which way the display faces, do the following:
1. Navigate to the Setup
2. Use <UP> or <DOWN> to select Screen Reverse.
3. Press <ENTER>.
4. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (display is normal), YES (display is
inverted), or AUTO (the display automatically detects which way the product is facing and orients
itself accordingly).
5. Press <ENTER>.
Maverick Storm 1 Wash User Manual Rev. 2
menu.
menu.
menu.
menu.
menu.
Page 50 of 306