5.2 Putting the Pool Cleaner into the pool
If Wonder brush/ Wonder rings are dry,
soak them in water until soft.
Shake the robot from side to side or turn it
upside down to release trapped air.
Let it sink to the pool floor.
Turn the power supply ON.
The Pool Cleaner will now operate until it has
reached the end of the cleaning cycle.
5.3 Removing the Pool Cleaner from the pool
The robot will perform automatic shut-off at the end
of the cleaning cycle.
Turn Off and unplug the power supply.
CAUTION
Using the floating cable, bring the Pool Cleaner to the pool's edge.
B
Using the handle remove the Pool Cleaner from the pool.
DO NOT PULL THE POOL CLEANER FROM THE POOL USING THE CABLE.
C
C
CAUTION
Dolphin Classic 5 / Top 5 Pool Cleaner | Operating Instructions
ON
OFF
B
A
ON
C
C
5