Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Appendix
Additional information
Specifications
Power source ............................. 14.4 V DC (10.8 V to 15.1 V
Grounding system ................... Negative type
Current consumption ............ 15 A (at continuous power,
Average current consumption
..................................................... 1.7 A (4 W for four channels)
Fuse ................................................ 15 A
Dimensions (W × H × D) ... 181 mm × 38 mm × 64 mm
Weight .......................................... 0.55 kg (1.2 lbs)
Maximum power output ....... 100 W × 4 (at 14.4 V, 4 W) /
Continuous power output ... 45 W × 4 (at 14.4 V, 4 W, 20
Load impedance ...................... 4 W (2 W to 8 W allowable)
Frequency response ............... 10 Hz to 40 kHz (+0 dB,
Signal-to-noise ratio ............... 90 dB (IHF-A network)
Distortion ..................................... 0.05 % (4 W, 1 kHz)
Low pass filter:
Cut off frequency ........... 80 Hz
Cut off slope ..................... –12 dB/oct
High pass filter:
Cut off frequency ........... 80 Hz
Cut off slope ..................... –12 dB/oct
Gain control:
RCA ...................................... Fixed 28 dB
Speaker .............................. Fixed 8 dB
Maximum input level / impedance:
RCA ...................................... 1.0 V / 22 kW
Speaker .............................. 10.0 V / 22 kW
CEA2006 Specifications
14
En
allowable)
4 W)
1.7 A (4 W for two channels)
1.7 A (2 W for four channels)
(7-1/8 in. × 1-1/2 in. ×
2-1/2 in.)
(Leads for wiring not in-
cluded)
200 W × 2 (at
14.4 V,4WBRIDGE)
Hz to 20 kHz, ≦ 1% THD)
90 W × 2 (at 14.4 V, 4 W
BRIDGE, 1 kHz, ≦ 1% THD)
45 W × 4 (at 14.4 V, 2 W, 1
kHz, ≦ 1% THD)
–3 dB)
Power output ............................. 45 W RMS × 4 Channels (at
S/N ratio ....................................... 74 dBA (reference: 1 W into
Notes
! Specifications and the design are subject to
modifications without notice.
! The average current consumption is nearly
the maximum current consumption by this
unit when an audio signal is input. Use this
value when working out total current con-
sumption by multiple power amplifiers.
14.4 V, 4 W and ≦ 1 % THD
+N)
4 W)
Publicidad
Tabla de contenido
