Basic Operation; Checking Part Names And Functions; Remote Control; On First-Time Startup - Pioneer MVH-AV290BT Manual De Instrucciones

Basic operation

Checking part names and
functions
1
2
3
4
5
6
7
1 LCD screen
 Resetting the microprocessor on page 6
2 RESET
button
3 Volume (+/–) button
4 Press to switch the mute setting to on or off.
MUTE
button
5 Press to switch the display between the top
button
menu screen and the current source screen.
6 DISP Press to turn the display on or off.
button
7 Track ( Performs manual seek tuning, fast forwards,
/ reverse and track search controls.
) button Press to answer or end a call.

Remote control

The remote control CD-R33 is sold separately.
For details concerning operations, see the remote control
manual.
Plugging and unplugging a USB stor-
age device
p This product may not achieve optimum performance with
some USB storage devices.
p Connection via a USB hub is not possible.
p A USB cable is required for connection.
1 Pull out the plug from the USB port of the USB
cable.
2 Plug a USB storage device into the USB cable.
1
2
1 USB cable
2 USB storage device
Check that no data is being accessed before pulling out the
USB storage device.

On first-time startup

1 Start the engine to boot up the system.
After a short pause, the splash screen comes on for a few
seconds.
The "Select Program Language" screen appears.
p From the second time on, the screen shown will differ
depending on the previous conditions.
2 Touch the language that you want to use on
screen.
3 Touch .
The top menu screen appears.
7