Aquolab Professional Manual De Instrucciones página 16

EN
ACCESSORIES
As standard equipment you will receive 10 sterilised disposable nozzles: 7 with a 0.6 mm
diameter (coloured nozzles) and 3 with a 0.8 mm diameter (white nozzles). We recommend
using the protocols as a reference for the correct use of the two types of nozzles. Indicatively,
the nozzles with a diameter of 0.8 mm are suitable for patients with heightened dentine
sensitivity and for children. The package you will receive also contains a blister package with 3
vials of de-scaling solution for ordinary maintenance (see the section on Maintenance).
Disposable sterilised nozzles with diameters of 0.6 mm and 0.8 mm are available at www.aquolab.
com.
The handle is detachable. If it is damaged or requires replacement, you can replace it without
having to replace the entire device.
1. When using for the first time or after a long period of inactivity, perform
a vacuum cycle before using your dental water jet
2. The device switches off automatically after 1 min/1.5 min to prevent
water-free operation
3. Fill the tank with water, about 300 ml
4. Insert a sterilised disposable nozzle into the handle
5. Use the LCD touch screen to adjust all the settings
related to water pressure and ozone quantity. (b.)
6. Press the button activating the water flow. (c)
7. Direct the nozzle as needed and press button D to activate/deactivate the
water jet
HOW TO REGULATE WATER AND OZONE LEVELS
To regulate water and ozone levels, use the HOME PAGE to access the PLAY page
(see figure) and use the relevant arrows. You can input and save patients/treatments and their
respective ozone/water levels:
1. on the "HOME PAGE" (fig. 1) select the "+" button.
2. The "KEYPAD" page (fig. 2) will open, where you can type in the name of a patient or
treatment. When you have finished typing, confirm by pressing the "OK" button.
3. The patient/treatment you have input will now appear in the list on the "HOME PAGE". To
set the ozone and water levels for that patient/treatment, click on the arrow next to the
name to access the PLAY page (fig. 3).
4. This is where you can set the levels. Click OK to save them.
These are just general recommendations. For specific needs, contact our Customer Service by calling
number: +39 02 366 86 416 or writing an email to: assistenza@aquolab.com
HOW TO USE THE AQUOLAB DENTAL WATER JET
®