The exact arrangement you use to interconnect various video and audio components to this unit is dependent
on the model and features of each component. Check the Owner's Manual provided with each component for
the location of video and audio inputs and outputs.
To connect the LCD TV to a VCR
Rear of the unit
To VIDEO/AUDIO IN
To connect the LCD TV to a VCR with an S Video cord
If you connect a VCR with a S-Video cable to the S-VIDEO IN jack on the rear side of the unit, you must also
connect the audio cables to the AUDIO IN jacks on the rear of the unit.
The S-Video cable only carries the video signal. The audio signal is separate.
NOTE:
•
When the S-Video cable and the standard video cable are connected at the same time, the S-Video cable
takes precedence.
Rear of the unit
To S-VIDEO IN
To AUDIO IN
To connect to a DVD player with Component Video Input
You can enjoy a high quality picture by connecting the unit's COMPONENT VIDEO OUT jacks of your DVD
player with the COMPONENT video cables (not supplied).
Component video cord (not supplied)
Rear of the unit
To COMPONENT IN
NOTE:
•
Component Video input of the unit are for use with a device which output 480i/1080i interlaced signals and
480p/720p progressive signals.
To connect the TV to a camcorder, or a TV Game
To playback from a camcorder, connect the camcorder to the unit as shown.
This unit can also be used as a display device for many video games. However, due to the wide variety of
signals generated by these devices and subsequent hook-up variations required, they have not all been
included in the suggested connection diagrams. You'll need to consult each component's Owner's Manual for
additional information.
Rear of the unit
To VIDEO/AUDIO IN
Connections to other equipment
To Video/Audio OUT
Video/Audio cord (not supplied)
S-Video cord (not supplied)
Audio cord (not supplied)
To Component OUT
To component AUDIO IN
Audio cord
(not supplied)
Video/Audio cord (not supplied)
To S-Video OUT
To Audio OUT
Y
P
b
P
r
To Audio OUT
To Video/Audio OUT
VCR
VCR
DVD
or
13