Starting Up; Maintenance & Cleaning; Technical Specifications; Troubleshooting - Selecta RONER 80013 Manual De Instrucciones

MANUAL DE INSTRUCCIONES
Actual temperature
Temperature display
27.7
37.0
Temperature se ng
Electric risk
Risk of high
temperature contact
Reference code:
Dimensions: height/width/depth (mm)
Supply voltage:
Electrical power (W):
Weight: (Kg)
External fuse:
Temperature range: (No refrigeration)
Display resolution:
Description
It does not heat
Temperature reading does
not match the external ther-
mometer
J
.P. SELECTA s.a.u.
CODIGO 80300 REV A

6. STARTING UP

All the equipment functions are set with the two push buttons placed on the panel. Gently
press with your fi nger in the centre of each icon.
6.1 Setting operation temperature
Use the keys
lower display (red).
Set point entry
7. MAINTENANCE & CLEANING
MAINTENANCE:
Before operating inside, disconnect from the mains.
The manipulation of the equipment internal electronic circuits by unauthorized
personnel can cause irreparable damage. Take it to one of ICC's authorized
technical services.
CLEANING:
To clean the accessible parts of the equipment, use a cleaner or a similar product.
Do not use aggressive solvents. To remove lime, you can use vinegar a bit lowered.

8. TECHNICAL SPECIFICATIONS

9. TROUBLESHOOTING

Cause
The safety thermostat has skipped
Heating element is melted
Temperature imbalance
Autovía A-2 Km 585.1 Abrera 08630 (Barcelona) España
e-mail: selecta@jpselecta.es - website: http://www.jpselecta.es
Sep2016 (Sujetas a modifi caciones sin previo aviso)
to set the target temperature. This value will appear in the
80013
280/180/190
230 VAC 50 - 60 Hz
2060
4
Replaceable (Type: 10x5mm)
Ambient Tª + 5ºC ...
0.1ºC
Resolution
Press the thermostat reset. See 9.1
Contact the technical service to replace
See 9.2 on how to act for adjustment
80015
115 VAC 50 - 60Hz
1060
150ºC
Tel 34 937 700 877 Fax 34 937 702 362
Pag.: 7