Installation Instructions; Before Using Your Compact Kitchen; Energy Saving Tips; Installation Of Your Compact Kitchen - Avanti CK3616 Manual De Instrucciones

Before Using Your Compact Kitchen

•
Remove the exterior and interior packing.
•
Check to be sure you have all of the following parts:
−
Kitchen Section
o 1 Wire Shelf
o Faucet Set
o Strainer
o Strainer Plug
o Backsplash and Assembly Screws
o Instruction Manual
−
Refrigerator Section
o 2 shelves
o Instruction Manual
•
Before connecting the refrigerator of your Compact Kitchen to the power source, let it stand
upright for approximately 2 hours. This will reduce the possibility of a malfunction in the cooling
system of the refrigerator from handling during transportation.
•
Clean the interior surface with lukewarm water using a soft cloth.

Energy Saving Tips

The Compact Kitchen should be located in the coolest area of the room, away from heat producing
appliances, and out of the direct sunlight.
Installation of the Compact Kitchen
9
2
Figure No. 1

INSTALLATION INSTRUCTIONS

NOTE: In order to remove crisper and/or shelves of refrigerator, a
clearance
A) Minimum of 10 inches is required. When built-in, no clearance
is required on either side.
B) 30 inches minimum clearance between the top of the cooking
surface and the bottom of an unprotected wood or metal cabinet.
7