U S I N G Y O U R H A N D / S TA N D M I X E R
You can use the Mixer to mix, knead and whisk food. The Mixer and Mixing Bowl are
each driven separately by their own motors, and the speeds of the Mixer and Mixing
Bowl can be individually adjusted. The Mixer has a single ON/ Speed Range Selector
Switch while the Mixing Bowl has an independent On/Speed Selector Switch. The
Mixer can be easily removed from the processor stand in a moment and used as a
standard Hand Mixer (figure 2). When used in this way, move the hand mixer in a
smooth circular motion around the inside of the Bowl containing the ingredients.
Fitting the Mixer to/ or removing from the stand (figure 2).
Before fitting or removing the Mixer switch off the appliance and remove the plug from
the electrical outlet.
To fit, push the mixer on to the stand (the two latches on the mixer stand engage in the
mixer) and then press down to lock.
To remove, press the Lock Release (figure 2) and pull the Mixer upwards.
O P E R AT I N G
P R E PA R I N G F O R U S E
(figure 2)
4