Operating instructions
• Sun protection systems with electric drives cannot be retracted in a power failure,
caused by a storm, for example. If you leave the house for a longer period for holidays or
the weekend, we recommend setting the automatic control system to manual operation.
• In automatic operation, the area of extension and retraction must be free of obstacles.
The sun protection system must be operated in accordance with these instructions. Other
uses are improper. STOBAG cannot accept liability for damage caused by improper use.
3.0 Care and maintenance
When cleaning or servicing sun protection systems with electric drives, ensure that the
power is switched off to prevent accidental extension or retraction.
3.1
Care and maintenance of mechanical parts
3.2
Wind sensor maintenance
EN-30
| www.stobag.com
As a rule, all mechanical parts are low-maintenance.
Occasional greasing of the front rail fixing with a suitable
lubricant, such as WD40
by a STOBAG specialist supplier is recommended and can
prolong the life of the awning.
Extend the awning cover fully for cleaning. Clean the frame
with a household cleaner for sensitive surfaces.
If there is a control system, the mechanical wind sensor
should be checked periodically for damage from external
causes and that it is functioning. Check that it turns in the
wind. If it does not turn correctly, it must be checked by a
STOBAG specialist supplier.
and periodic checks and servicing
®
All rights to make modifications are reserved