Stihl SR 430 Manual De Instrucciones página 18

English
3
4
1
Push narrow hose clamp (3), marks
N
facing left, onto the elbow (4).
Route the antistatic wire (1) through
N
the slot in the hose clamp (3).
Push the pleated hose (2) onto the
N
elbow (4).
3
4
5
4
5
3
Push the hose clamp (3) onto the
N
pleated hose (2).
Line up the marks on the hose
N
clamp (3) and elbow (4) – as shown.
Secure the hose clamp (3) with the
N
screw (5) – make sure the antistatic
wire is located in the notch.
16
Adjusting and securing the control
handle
2
Put the machine on your back and
N
adjust the harness – see "Harness".
1
Slide the control handle (1) along
N
the tube to the most comfortable
position – distance between nozzle
outlet (2) and the control handle (1)
2
must be at least 19.7 in (500 mm)
('a').
Secure the control handle (1) with
N
the screw (3).
a
2
1
3
Use the retainer (4) to secure the
N
hose and throttle cable, and
metering unit's operating cable on
the SR 450, to the 6th pleat (arrow)
on the pleated hose.
SR 430, SR 450
4