Declaration; Declaration Of The Manufacturer - NEC Display Solutions MultiSync LCD1990SX Manual Del Usuario

TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT
USE THIS UNIT'S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS
THE PRONGS CAN BE FULLY INSERTED.
REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM
WALL SOCKET. TO FULLY DISENGAGE THE POWER TO THE UNIT, PLEASE DISCONNECT THE
POWER CORD FROM THE AC OUTLET.DO NOT REMOVE COVER (OR BACK). NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol warns user that uninsulated voltage within the unit may have sufficient magnitude to cause
electric shock. Therefore, it is dangerous to make any kind of contact with any part inside this unit.
This symbol alerts the user that important literature concerning the operation and maintenance of this unit
has been included. Therefore, it should be read carefully in order to avoid any problems.
CAUTION: Please use the power cord provided with this display in accordance with the table below. If a power cord is not
supplied with this equipment, please contact your supplier. For all other cases, please use a power cord that matches the
AC voltage of the power outlet and has been approved by and complies with the safety standard of your particular country.
Plug Type
Plug Shape
Country
Voltage
*When operating the MultiSync LCD1990SX monitor with its AC 125-240V power supply, use a power supply cord that
matches the power supply voltage of the AC power outlet being used.
NOTE: This product can only be serviced in the country where it was purchased.

Declaration

We hereby certify that the colour monitor
MultiSync LCD1990SX (L195RR) is in
compliance with
Council Directive 73/23/EEC:
– EN 60950-1
Council Directive 89/336/EEC:
– EN 55022
– EN 61000-3-2
– EN 61000-3-3
– EN 55024
Windows is a registered trademark of Microsoft Corporation. NEC is a registered trademark of NEC Corporation.
E S is a U.S. registered trademark.
NERGY TAR
ErgoDesign is a registered trademark of NEC Display Solutions, Ltd. in Austria, Benelux, Denmark, France, Germany, Italy, Norway, Spain,
Sweden, U.K.
All other brands and product names are trademarks or registered trademarks of their respective owners.
®
As an E S Partner, NEC Display Solutions of America, Inc. has determined that this product meets the E
NERGY TAR
energy efficiency. The E
NERGY
01_English
European
North America
Continental
U.S.A./Canada EU (except U.K.)
120* 230

Declaration of the Manufacturer

S emblem does not represent EPA endorsement of any product or service.
TAR
2
WARNING
CAUTION
U.K.
U.K.
230
and marked with
NEC Display Solutions, Ltd.
4-13-23, Shibaura,
Tokyo 108-0023, Japan
English-2
18/6/07, 10:57 AM
Chinese Japanese
China Japan
220 100
Minato-Ku
S guidelines for
NERGY TAR