Fuse Check/Replacement/Reset - Nilfisk-Advance SC351 Instrucciones De Uso

For cleaning machines, parts & supplies click/visit www.southeasternequipment.net

FUSE CHECK/REPLACEMENT/RESET

1. Drive the machine on a level floor.
2. Check that the function selection knob (31) is turned to "0"
and disconnect the battery connector (7).
3. Open the cover (4) and check one of the following fuses
for deactivation or integrity (Fig. 8):
• (A): F1 (35 A) circuit breaker, brush motor.
• (B): F2 (30 A) blade fuse, vacuum system motor.
• (C): F3 (5 A) blade fuse, accessories.
Reset or replace any fuse, after having checked and
repaired any problem that caused deactivation.
4. Close the cover (4).
For cleaning machines, parts & supplies click/visit www.southeasternequipment.net
INSTRUCTIONS FOR USE
C
B
Figure 8
9099867000 - SC351
ENGLISH
A
P100414
19