Epson L810 Manual Del Usuario página 3

L810/L850
Start Here
1
Unpack
Note: The included ink bottles must be used for product setup and are not for resale.
2
Fill ink tanks
Note: This product requires careful handling of ink. Wear plastic gloves and place a
sheet of paper under the ink tank unit when you fill or refill the ink tanks, as ink may
splatter. If ink spills, wipe it off immediately to avoid permanent stains. If ink gets on
your clothes or belongings, it may not come off.
Select your language, then press OK.
3
Load paper
Caution:
bottles are vacuum packed to maintain reliability. Never place the product on its side
after the ink tanks are filled.
Warning:
Replace bottle cap tightly, or ink may leak.
When a message appears Confirm that the tanks are filled with ink,
on the LCD screen, press then press
OK for 3 seconds. charging takes approximately 20 minutes.
Read these instructions before using your product.
Note: The instructions show the L850, but the instructions
are the same for the L810 unless otherwise noted.
Do not open the ink bottles until you are ready to fill the ink tanks. The ink
Keep ink bottles out of the reach of children and do not drink the ink.
Make sure to use the ink bottles
that came with your product
and use all of the ink.
Fill each tank with the correct
ink color.
to start charging the ink. Ink
English
Make sure that the tray lever is in
the up position.
See the online User's Guide for
instructions on how to print on
CDs/DVDs.