Brew Pause™ Feature; Cleaning And Maintenance; Decalcification - Cuisinart PurePrecision CPO-800 Manual De Instrucciones

BREW PAUSE™ FEATURE
This feature interrupts the flow of coffee from
the basket to let you pour that first cup mid-
brew. Because the flavor profile of coffee
brewed at the start of a cycle differs from
that brewed toward the end, be aware that
using this feature will weaken the flavor
strength of the finished pot.
NOTE: Removing carafe for more than 20
seconds during brew cycle may cause filter
basket to overflow.
CLEANING AND
MAINTENANCE
Always turn coffee brewer off and remove
the plug from the electrical outlet before
cleaning.
Lift up the coffee brewer lid. Remove and
discard the paper filter and ground coffee.
The filter basket can be washed in warm,
soapy water and rinsed thoroughly, or
cleaned on the upper rack of the dishwasher.
Dry all parts after use.
Do not put any water in the unit once
the filter basket has been removed.
Wipe the area under the filter basket
with a damp cloth.
Remove the carafe from the heating plate.
Discard any remaining coffee. The carafe and
lid can be washed in warm, soapy water and
rinsed thoroughly, or placed in a dishwasher.
The carafe and carafe lid should be placed
on the upper rack only.
Do not use any scouring agents or harsh
cleansers on any part of the coffee brewer.
Never immerse base unit in water or other
liquids. To clean base, simply wipe with a
clean, damp cloth and dry before storing.
Fingerprints and other blemishes on the
housing can be washed off with soap and
water or a nonabrasive cleaning solution.
Wait for heating plate to cool, then wipe with
a clean, damp cloth. Never use rough,
abrasive materials or cleansers to clean the
heating plate. Do not dry the inside of the
water reservoir with a cloth, as lint may
remain.
Maintenance
Any other servicing should be performed by
an authorized service representative.

Decalcification

Decalcification refers to the removal of
calcium deposits that form over time on
the metal parts of your coffee brewer. The
mineral content of the tap water in your area
and the frequency of use affects the rate of
the calcium buildup, which can affect the
functioning of your coffee brewer and the
flavor of your coffee.
For best performance from your
PurePrecision™ Pour-Over Coffee Brewer,
we recommend cleaning it whenever CLEAN
is flashing on your control panel.
NOTE: Before decalcifying your unit, remove
the charcoal water filter from the water
reservoir.
To clean:
1. Fill the water reservoir to capacity with a
1
mixture of ⁄ white vinegar and
3
2. Press MENU button 5 times to get to
clean start. Press BREW/OFF to begin
cleaning cycle.
3. When the cycle is completed, 5 beeps will
sound and the coffee brewer will shut off.
4. If CLEAN flashes once more, repeat the
cleaning procedure with a fresh solution of
vinegar and water. NOTE: One cleaning
cycle is usually sufficient.
5. When CLEAN remains off, run one cycle
with a full reservoir of fresh, cold water to
rinse the unit.
6. Return the charcoal water filter to the
holder inside the water reservoir and your
coffee brewer is ready to brew!
10
2
⁄ water.
3