Tips And Hints; Troubleshooting - Cuisinart baby CS-7 SERIE Manual Del Usuario

Sterilize & Auto Dry Function
7. Press the ON/OFF button to turn unit on. A blue light will turn
on, indicating the sterilizing process will begin.
Note: It takes about 12 minutes for the sterilizing process
to complete.
8. After approximately 12 minutes pass, the ON/OFF light will
switch from blue to white and immediately start the drying
function. The drying process can take up to 60 minutes total.
Note: The user has the option to Sterilize ONLY. (Follow steps
1–6) Press the ON/OFF button to turn unit on. This begins the
sterilizing process. After 12 minutes and the light changes to
white, press ON/OFF button to turn off unit and unplug from
outlet. Remove sterilized bottles and accessories. Be careful
handling as items and unit will be hot.
7. 8.

TIPS AND HINTS

For best results, use distilled water (page 4)
to minimize a buildup of calcium in the sterilizer base.

TROUBLESHOOTING

Q: Why won't sterilizing start when I turn the unit on?
A: Check that the plug is securely inserted into the outlet.
A: The sterilizer base may be empty.
Add required water amount to the water reservoir.
Q: How do I empty the unit of excess
water?
A: To empty the unit of excess water, remove tray, lid and bottle
chamber and tilt the sterilizer base onto its side over the sink.
Any extra water will come out.
Note: Never empty the water from the direction of fan port.
Q: Why is there a white residue in the sterilizer base
water reservoir?
A: Mineral-rich water causes calcium deposits to build up in the
sterilizer base. The unit should be cleaned out once a month to
avoid this buildup. Refer to the Decalcification section in Clean-
ing and Maintenance, following. To help prevent/minimize this
buildup, distilled or purified water can be used.
Q: Why are the bottles coming out with marks on them?
A: This can happen when the sterilizer has a buildup of calcium
deposits. Refer to the Decalcification section in Cleaning and
Maintenance, following.
6