Changing The Sound And Display Settings - Sony CDX-F5500X Manual De Instrucciones

Changing the sound and
display settings
The following items can be set:
• REAR/SUB* 1 — to switch the audio output
REAR or SUB.
– Select "REAR" to output to a power amplifier.
– Select "SUB" to output to a subwoofer.
• A.SCRL (Auto Scroll)*
• M.DSPL (Motion Display) — to turn the
motion display on or off.
– Select "ON" to activate the motion display
(the moving pattern appears in the display).
– Select "OFF" to deactivate the motion display.
• DEMO* 1 — to turn the demonstration display
on or off.
– Select "ON" to activate the demonstration
display (The demonstration starts about 10
seconds after the unit is turned off).
– Select "OFF" to deactivate the
demonstration display.
• BEEP* 3 — to turn the beeps on or off.
• DIM — to change the brightness of the display.
– Select "ON" to dim the display.
– Select "OFF" to deactivate the Dimmer.
2 (page 12).
Switching the REAR/SUB*
Press the select button and then rotate
the volume control dial.
After 3 seconds, the display returns to normal
play mode.
Selecting the desired item
Press the select button and the
desired button simultaneously.
select button + (3): A.SCRL*
select button + (4): M.DSPL
select button + (4): DEMO*
select button + (6): BEEP*
select button + (DSPL): DIM
After the mode setting is complete, the display
returns to normal play mode.
To cancel the item, press the select button and the
desired button simultaneously again.
*1 When the unit is turned off.
*2 When CD or MD is played.
*3 The beep sound is output only when the built-in
amplifier is used.
1
2
1
3
21