Using The Rotary Commander - Sony WX-C55 Manual De Instrucciones

Using the rotary
commander
The rotary commander works by pressing
buttons and/or rotating controls.
You can control an optional CD/MD unit by
the rotary commander.
By pressing buttons (the SOURCE
and the MODE buttons)
(SOURCE)
Every time you press (SOURCE), the
source changes as follows:
B TUNER B CD
Pressing (MODE) changes the operation
in the following ways:
• Tuner: FM1 t FM2 t AM1 t AM2
• CD unit: CD1 t CD2 t ...
• MD unit: MD1 t MD2 t ...
• Tape: tape transport direction
Tip
You can turn on this unit by pressing (SOURCE) on
the rotary commander.
12
(MODE)
B MD B TAPE
By rotating the control (the SEEK/
AMS control)
Rotate the control momentarily and
release it to:
•Locate the beginnings of tracks on the
tape. Rotate and hold the control, then
release it to fast-wind the tape.
•Locate a specific track on a disc. Rotate
and hold the control until you locate the
specific point in a track, then release it to
start playback.
•Tune in stations automatically. Rotate
and hold the control to tune in a specific
station.
By pushing in and rotating the
control (the PRESET/DISC control)
Push in and rotate the control to:
•Receive the stations memorised on the
preset buttons.
•Change the disc.