Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
PARTS INCLUDED IN THE KIT
1. Front Frame Assembly- QTY 1
2. Exhaust Duct - QTY 1
Bottom
Mounting Rail – QTY 2
3. Screw A - QTY 11 +
3 extra
4. Screw B - QTY 4
+ 2 extra
CHOOSING A LOCATION FOR
YOUR MICROWAVE OVEN IF
BUILT-IN
Built-In Trim Kit allows for the installation of microwaves
listed below to be built into a cabinet or wall by itself or
over an electric wall oven*.
Microwave Models:
FGMO226NUF FGMO226NUD FPMO227NUF
CGMO226NUF CPMO227NUF
See Illustration 1 for proper location and when building
in above a wall oven. Carefully follow both the wall oven
installation instructions and Electrolux's Built-in Kit
instructions. If building over a wall oven, be sure the
clearance between the wall oven and the microwave
oven is a minimum of 3 inches.See illustration 2.
*NOTE:
Trim Kit and microwave can only be built-in
over an electric self-clean or non self-clean
single cavity wall oven.
CABINET OR WALL CUTOUT
Cutout Dimensions( See illustration 3)
Height (A)
16
Minimum
Maximum
17 (43.2 cm)
Width (B)
Minimum
24
Maximum
25
Depth (C)
Minimum
2
Installation Instructions
"
(42.5 cm)
3/4
"
"
(62.9 cm)
3/4
" (63.5 cm)
(50.8 cm)
0 "
Front Frame Assembly
Exhaust Duct
Illustration 1
Illustration 2
Trim Kit Overall Dimensions
MWTK27
Height 18" （458mm ）
Width
（686mm ）
27"
Depth
1 1/2" (38.9cm)
EN-2
Screw A
Screw B
Bottom Mounting Rail
3"Min
MWTK30
18" （458mm ）
（762mm ）
30"
1 1/2" (38.9cm)
Publicidad
Tabla de contenido
