Automatic Adjustment Of Screen Position And The Clock; Independent Operation Of Multiple Monitors; Using The Menu Screen - Yamaha PDM-4210E Manual De Usuario

OPERATING INSTRUCTIONS (continued)
RGB 1
AUTO button
MENU button
ID button
Automatic Adjustment of
Screen Position and the Clock
Adjustment of the screen to a position suitable for the
PC signal and the clock adjustment can be performed
automatically by pressing the AUTO button of the remote
control.
CAUTION
Perform this adjustment for each input (RGB1 or RGB2) and for
each signal.
* Depending on the signal, satisfactory adjustment may not be
possible in some cases. In such cases, adjust by referring to the
Setup Menu item.
Independent Operation of
Multiple Monitors (ID No)
Setting the ID No. of the remote control allows separate
control of up to a maximum of seven monitors.
Remote control ID No. 2 (initially ID no. 1) can be set by
pressing the ID SET button for 2 sec. or more while
holding down the ID button. The number will be
incremented (2• • • 6 ➔ 7 ➔ 1 ➔ 2) when this button pressed
continuously.
ID Number
Monitor [ 1 ]
R/C [ 1 ]
Remote control ID no.
The ID remote control is operated by pressing the
various buttons while holding down the ID button;
Operation is possible only when the remote control and
monitor ID nos. are the same.
• The remote control can be operated normally by pressing the
various remote control buttons without holding down the ID button.
• Set the monitor using the ID No. of Function MENU.
16
VOL
RGB 2 MUTE VOL
AV1 AV2 AV3 AV4
RETURN buttons
AUTO PinP SIZE RECALL
MENU
SELECT/ADJUST
buttons
OK
OK button
ID ID SET
ID SET button
The remote control ID no. can be
checked by pressing the ID SET button
while holding down the ID button.
Monitor ID no.

Using the Menu Screen

(On-screen display system)
When the MENU button is pressed, the adjustment menu
screen will be displayed; from there, PC signal
adjustment and setting is possible by using the SELECT
button, ADJUST button and OK button.
• Refer to
settings.
Example: Selecting the Picture screen
1. Press the MENU button to display the Main Menu
screen.
2. Press the OK button to display the Picture Menu
screen. (Use the
other items.)
3. Use the
be adjusted and then use the
buttons to adjust (example: Contrast).
• Press the RETURN button to return to the previous screen.
• If there is no operation for a period of one minute, the
Adjustment Menu screen will be closed automatically.
19
- 21 concerning the adjustment items and the
17
Picture
Audio
MENU
Timer
Function
Setup
Language
Select
OK
and SELECT buttons to select
Picture
Contrast
Brightness
OK
Colour
Hue
Picture Enhancement
Colour Temperature
Colour Temp.Adjust
Reset
Select
and SELECT buttons to select the item to
Contrast
Next / Prev
Set
: + 31
: – 31
: 0
: + 31
: Off
: Normal
Reset
Return Exit
and ADJUST
+ 31
Adjust Return