Entertainment Settings; System Settings - Pioneer DEH-X8700BH Manual De Instrucciones

Menu Item
Subwoofer1
[Normal], [Reverse], [OFF]
Subwoofer2
Cut-off frequency: [50Hz],
[63Hz], [80Hz], [100Hz], [125Hz]
Output level: [–24] to [+6]
Bass Booster
[0] to [+6]
HPF
Cut-off frequency: [OFF], [50Hz],
[63Hz], [80Hz], [100Hz], [125Hz]
SLA
[+4] to [–4]

ENTERTAINMENT settings

You can enjoy various entertainment displays while listening to each sound source.
Select a display type from [Simple display], [spectrum analyzer], [level indicator] or
[calendar].
NOTE
When SiriusXM, HD Radio, Radio, or AUX is selected as a source, the simple display will appear even if
spectrum analyzer or level indicator is set.

SYSTEM settings

You can also access these menus when the unit is turned off.
Menu Item
Language select
[English], [Français], [Español]
Description
Select the subwoofer phase.
Only frequencies lower than those in the
selected range are output from the subwoofer.
Select the bass boost level.
Only frequencies higher than the high-pass filter
(HPF) cutoff are output from the speakers.
Adjust the volume level for each source except
FM.
Each of the below combinations are set to the
same setting automatically.
• USB, iPod, Pandora (iPhone), and App (iPhone)
• BT Audio, Pandora (Android), and App
(Android)
Description
Select the language to display the text
information from a compressed audio file.
Menu Item
Calendar
Clock Setting
EngineTime alert
[OFF], [15Minutes], [30Minutes]
Clock
[ON], [Elapsed time], [OFF]
Warning tone
[ON], [OFF]
AUX
[ON], [OFF]
BT AUDIO
[ON], [OFF]
Clear memory
[Clear memory YES], [Cancel]
BT Version Info.
APP CONNECT MODE*
[Wired], [Bluetooth]
* Not available when [Pandora] or [App] is selected as the source.
Description
Set the date.
Set the clock and select the time notation
(page 6).
Display how much time has elapsed since the
vehicle was turned on.
Set the clock or the elapsed time to display even
if the unit is turned off.
A beep can be heard when the front panel is not
detached from the head unit within four seconds
of turning off the ignition. Select [OFF] to disable
this function.
Set to [ON] when using an auxiliary device
connected to the unit.
Set the Bluetooth signal on/off.
Clear the Bluetooth device data (device list, PIN
code, call history, phone book, preset phone
numbers) stored in the unit.
[Cleared] appears when data is successfully
deleted.
Displays the system version of the unit and the
Bluetooth module.
Select the appropriate connection method
according to your device.
19
En