Sears Craftsman 286.25574 Manual De Uso página 18

REMOVING BLADES FROM SAW cont, (See Figs, 12- 15)
Fig. 13
Fig, 14
!
Fig. 15
ATTACHING REPLACEMENT BLADES TO THE SAW (See Figs. 16 - 19)
i ii i i
1_ WARNING:
This Twin Cutter saw uses specially designed 61/a-in. blades
and no other types or sizes of blades shouldever be used, Other types and sizes
i of blades wlll not operate safely in this saw and could result in serious personal
I iojury.
See the accessories section of this manual for the proper replacement blades
that are needed for this saw.
1. Unplug the sawn
2. Lay the saw down with the blade arbor pointing upward.
3o Place blade "A" onto the blade flange with the "A" clearly visible (see Fig. 16).
4. Align the holes on the blade with the pins on the flange and securely fit the blade
on the flange (see Fig. 17)o
5. Place blade "B" onto the arbor with the "B" easily visible, then thread lock nut
onto shaft, DO NOT tighten, (see Fig° 18)o
6. Turn the blades so that the holes in both blades are lined up.
18
| !