Quilo QE1S Manual Del Propietário página 11

STORAGE AND MAINTENANCE GUIDELINES
Below is a general guideline for maintenance and storage of your unit.
WARNING: Always switch OFF the QE1S and unplug it from the electrical source before
cleaning or maintenance.
Cleaning
At least once a week, drain the water tank completely and refill with fresh water. Doing this will greatly
reduce mineral deposits and help to extend the life of the Honeycomb Cooling Media.
End of Season Storage
If the QE1S will not be used for a long time:
• Make sure all parts are dry by running the Fan Only mode for about 1 to 2 hours before storing (time
depends on ambient humidity conditions).
• Switch OFF the QE1S and unplug from the power supply.
• Empty/drain all the water from the tank.
• Clean the water tank with a damp cloth to wipe away any dust or mineral deposits.
• Remove the Honeycomb Cooling Media and Carbon Dust Filter* from the QE1S and rinse under
fresh water to remove dust and dirt.
• Replace the Honeycomb Cooling Media and Carbon Dust Filter* after they are clean and dry.
• To protect the unit from dust, moisture and scratches, cover with a clean cloth, tarp or plastic bag
before storing.
• Coil the power cord and store it away from the floor to protect it.
• Store this unit at room temperature in a dry location, away from direct sunlight and/or very hot, cold
or damp environments.
* Carbon Dust Filter is available in specific models of Quilo QE1S only.
10
EN