Key To Symbols; Symbols On The Machine; Explanation Of Warning Levels - Husqvarna DCR300 Manual De Instrucciones

Symbols on the machine:

WARNING! The machine can be a dangerous
tool if used incorrectly or carelessly, which can
cause serious or fatal injury to the operator or
others.
Please read the operator's manual carefully
and make sure you understand the instructions
before using the machine.
Wear personal protective equipment. See
instructions under the heading "Personal
protective equipment".
WARNING! Risk of crush injuries! There is
always a risk of crush injuries when working
with products containing moving parts.
WARNING! Hot surface.
WARNING! Watch out for demolition material
becoming loose when cutting. Use personal
safety equipment and keep your distance.
WARNING! Hydraulic pressure even when
machine is shut off. Check operator's manual
before service.
The lifting equipment must be attached at all
the machine's lifting points.
This product is in accordance with applicable
CE directives.
Environmental marking. Symbols on the
product or its packaging indicate that this
product cannot be handled as domestic waste. It
must instead be submitted to an appropriate
recycling station for the recovery of electrical and
electronic equipment.
By ensuring that this product is taken care of correctly, you
can help to counteract the potential negative impact on the
environment and people that can otherwise result through the
incorrect waste management of this product.
For more detailed information about recycling this product,
contact your municipality, your domestic waste service or the
shop from where you purchased the product.
Other symbols/decals on the machine refer to special
certification requirements for certain markets.
2 –
English

KEY TO SYMBOLS

Explanation of warning levels

The warnings are graded in three levels.
WARNING!
CAUTION!
NOTICE!
NOTICE! Used if there is a risk of damage to materials or
the machine if the instructions in the manual are not
followed.
WARNING! Used if there is a risk of serious
!
injury or death for the operator or damage to
the surroundings if the instructions in the
manual are not followed.
CAUTION! Used if there is a risk of injury to
!
the operator or damage to the surroundings
if the instructions in the manual are not
followed.