Reverse Door - Impecca RC-2311 Manual De Usuario

REVERSE DOOR

Tools required: Phillips screwdriver, flathead screwdriver, hexago-
nal spanner (Allen wrench).
• Ensure the unit is unplugged and empty.
• To take the door off, it is necessary to tilt the unit backwards.
You should rest the unit on something solid so that it will not
slip during the door reversing process.
• All parts removed must be saved to do the re-installation of
the door.
• Do not lay the unit flat as this may damage the coolant sys-
tem.
• It's better that 2 people handle the unit during assembly.
1. Carefully remove the top hinge cover with a flathead screw-
driver.
2. Unscrew the top hinge with a Phillips screwdriver.
3. Remove the hole cover with a flathead screw driver.
–8–