Bosch MUZ5FW1 Instrucciones De Uso página 19

Preparing the base unit
Note: The food processor shown in
the pictures may differ from your
model in terms of shape and fea-
tures.
Set up the base unit as described
1.
in the main operating instructions.
Press the release button and move
2.
the swivel arm down until it en-
gages in the vertical position.
→ Fig.
3
a The swivel arm is fixed in posi-
tion 3.
Rotate the base unit to the operat-
3.
ing position.
→ Fig.
4
Inserting the seal
Insert the seal into the housing
▶
and press in firmly.
→ Fig.
5
The recesses must match up ex-
actly.
Assembling the attachments
WARNING
Risk of injury!
Improper use may cause injuries.
Never assemble the accessories
▶
on the base unit.
Note: To use the special accessory,
you need the parts of the meat min-
cer, except for the knife and perfor-
ated disc.
Assembling the meat mincer
Fit the worm gear into the housing
1.
with the agitator paddle at the
front.
→ Fig.
6
1
Special accessory
Before using for the first time en
Fit the knife onto the worm gear
2.
with the square projection at the
front.
→ Fig.
7
Insert the required perforated disc
3.
into the housing.
→ Fig.
8
Observe the recess on the perfor-
ated disc.
Fit the threaded ring and tighten
4.
clockwise slightly.
→ Fig.
9
Assembling the juicer
1
attachment
Follow the illustrated instructions.
→ Fig. -
10 14
Assembling the Viennese whirl
1
attachment
Follow the illustrated instructions.
→ Fig. -
15 18
Assembling the grater
1
attachment
Follow the illustrated instructions.
→ Fig. -
19 22
Fitting the attachment
WARNING
Risk of injury!
Improper use may cause injuries.
Only attach and remove accessor-
▶
ies once the drive has stopped
and the appliance has been un-
plugged.
Open the locking lever.
1.
→ Fig.
23
Hold the prepared attachment hori-
2.
zontally and match up the ends of
the agitator paddle with the drive.
→ Fig.
24
19