Processing food using the
blender attachment
WARNING
Risk of injury!
Improper use may cause injuries.
Only use the accessories once
▶
fully assembled.
The accessories should only be
▶
used in the intended operating po-
sition.
Never reach into the fitted access-
▶
ory.
Never operate the accessory
▶
without fitting the lid.
WARNING
Risk of scalding!
Hot food may splash out during pro-
cessing and steam can escape from
the lid.
Add a maximum of 500 ml of hot
▶
or frothing food.
Process hot food carefully.
▶
Do not lean over the blender jug.
▶
Prepare your food.
1.
Cut up large items of food.
Add the food to the blender jug.
2.
→ Fig.
7
Insert the funnel in the lid and
3.
place the lid on the blender jug.
→ Fig.
8
Rotate the lid anticlockwise until it
4.
engages.
→ Fig.
9
The lid must be completely closed.
Insert the mains plug.
5.
Set the rotary switch to the recom-
6.
mended speed.
→ Fig.
10
Process the ingredients until you
7.
achieve the required result.
Set the rotary switch to
8.
→ Fig.
11
Adding more ingredients
To add more ingredients during
1.
processing, select one of the fol-
lowing options:
‒
‒
→ Fig.
To add large quantities, set the
2.
rotary switch to
Wait until the appliance stops.
Rotate the lid clockwise and re-
3.
move.
Add the ingredients as described
4.
and continue processing.
→ "Processing food using the
blender attachment", Page 15
Emptying the blender attach-
ment
Risk of injury!
Improper use may cause injuries.
Only attach and remove accessor-
▶
ies once the drive has stopped
and the appliance has been un-
plugged.
Pull out the mains plug.
1.
Rotate the blender attachment
2.
clockwise until it disengages.
→ Fig.
Remove the blender attachment
3.
from the base unit.
→ Fig.
Rotate the lid clockwise and re-
4.
move.
→ Fig.
Place the processed food in a suit-
5.
able container or serve immedi-
.
ately.
→ Fig.
Basic operation en
Add liquids through the funnel in
the lid.
Take out the funnel and add
solid ingredients through the
opening.
12
WARNING
13
14
15
16
.
15