Panasonic TC-P50G10X Manual Del Operador página 37

(Continued)
Sets the mode to select the channel with Channel up/down button
(All/Favorite/Digital only/Analog only)
•
Favorite: Only channels registered as FAVORITE (p. 20)
Selects the screen menu language (p. 16)
Adjusts the clock (p. 18)
Sets channels (p. 50)
Selects the terminal and label of the external equipment (p. 53)
[Component 1/Component 2/HDMI 1/HDMI 2/HDMI 3/Video 1/Video 2]
To prevent howling, stops output of audio specified in this menu. (p. 53) (On/Off)
Prevents "Image retention" with Wobbling. (Automatic/Periodic)
•
Automatic: Shifts the display image automatically.
•
Periodic: Shifts the display image every (1/2/3/4) minutes according to what was set in the "Time (minutes)" menu.
Sets the time for "Pixel orbiter-Periodic" setting. (1/2/3/4)
Change the brightness of the side bar (Off/Dark/Mid/Bright) (4:3 mode only)
•
The recommended setting is "Bright" to prevent panel "Image retention". (p. 60)
Press "OK" to start "Scrolling" on the screen (p. 60)
Controls equipment connected to HDMI terminals (p. 40) (On/Off)
•
"Power off link", "Power on link", "Stand-by power save", "Auto power stand-by" and "Default speakers" cannot be selected if "Off" is set.
Sets "Power on link" of HDMI connection equipment (p. 40) (Yes/No)
Sets "Power off link" of HDMI connection equipment (p. 40) (Yes/No)
Set "Stand-by power save" of HDMI connection equipment. (p. 40) (No/Yes)
Set "Auto power stand-by" of HDMI connection equipment. (p. 40)
(No/Yes (with reminder)/Yes (no reminder)
Selects the default speakers (p. 40) (TV/Theater)
Sets Network setting (p. 44)
Sets VIERA CAST setting (p. 46)
Set Network Camera status. (Search/Registration/Connection/Deleting/Default setting etc.) (p. 30)
To conserve energy, the TV automatically turns off when NO SIGNAL and NO OPERATION is performed
for more than 10 minutes. (Enable/Disable)
Note
•
Not in use when setting "Auto power on", "On/Off Timer", "Lock", "SD mode" or Digital channel.
•
"No signal for 10 minutes was activated" will be displayed for about 10 seconds when the TV is turned
on for the first time after turning the power off by "No signal for 10 minutes".
•
The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutes prior to the shut-off.
To conserve energy, the TV automatically turns off when no operation of remote or side panel key
continues for more than 3 hours. (Enable/Disable)
Note
•
Not in use when setting "Auto power on", "On/Off Timer" or PC input display.
•
"No activity for 3 hours was activated" will be displayed for about 10 seconds when the TV is turned on
for the first time after turning the power off by "No activity for 3 hours".
•
The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutes prior to the shut-off.
Turns TV On automatically when the cable box or a connected device is turned On. (No/Yes)
TV power cord must be plugged into this device. TV comes on every time the power is restored.
•
The "Sleep" timer, "On / Off timer", and "First time setup" will not function if "Auto power on" is set. (p. 54)
Set "Movie", "Thumbnail" or "Slideshow" to play back SD cards automatically.
(Slideshow/Thumbnail/Movie/Set later/Off)
Displays TV version and software license.
Performing Reset will clear all items set with Setup, such as channel settings. (p. 50)
Sets the mode to select the channel with Channel up/down button (All/Favorite/Digital only/Analog only)
Sets favorite channels. (p. 20)
Changes the station identifier. (p. 51)
Checks the signal strength if interference or freezing occurs on a digital image. (p. 51)
Adjustments/Configurations (alternatives)
Adjustments/Configurations (alternatives)
Channel surf mode
All
Language
Clock
ANT/Cable setup
Pixel orbiter Automatic
Time (minutes)
4
4:3 side bars
Bright
Scrolling bar
VIERA Link
On
Power on link Yes
Power off link
Yes
Stand-by power save
No
Auto power stand-by
No
Default speakers
TV
Network setting
VIERA CAST setting
Network cameras list
No signal for 10 minutes
Enable
No activity for 3 hours
Disable
Auto power on No
Play SD card automatically
Set later
About
Reset to defaults
37