F Eatures Of Y Our S Tand M Ixer Cont - Oster FPSTSM5101 Manual De Instrucciones

P s M u
F Y s M ( .)
eatures oF our tand ixer cont
reParing the tand ixer For se
Before preparing the mixer for use, be sure the speed control dial is in
the OFF position and the electric cord is unplugged. Be sure to wash
bowls and attachments before initial use.
r L M h
aising and owering the ixing ead
Press the tilt release button, located at the top of the neck of the Stand
Mixer. While the button is depressed, hold the handle (1) and ease the
head of the Stand Mixer back. The head will lock into this tilt position
(2). To lower the mixing head, press the tilt release button. While the
Figure 1
button is depressed, hold the handle (2) and ease the head of the Stand
Mixer down (1). A "click" sound will indicate when the mixer head has
locked into position. (See Figure 2)
Figure 2
i a
nstaLLing the ttachMents
Beaters, Dough Hooks, and Whisks (on select models)
Select the pair of attachments best suited for your mixing job. (See
Mixing Guide for recommendations). Take the attachment that has a
green colored band around the top – illustrated as attachment (A).
Insert attachment (A) into the socket on the side of the mixer nearest
the side of the bowl. The socket is identified by a green dot beside it.
c s
One quare
B B
eater eater
Take the other attachment that has a gray colored band around the
top – illustrated as attachment (B). Insert attachment (B) into the socket
Figure 3
nearest the center of the bowl. (See Figure 3)
N : Be sure both attachments click firmly in place. You may need
OTE
to twist the beater attachment slightly to engage it in position prior to
pushing it in place.
s c d
peed OntrOl ial
Figure 4
English-7
English-6