Tabla de contenido
Publicidad
Motion Sensing LED Spotlight
INSTALLATION INSTRUCTIONS:
Before beginning installation, please be sure to read through all instructions.
To install your Motion Sensing LED Spotlight, you will need the following items:
• 1 small Phillips screwdriver (Not included)
• 3 D-Cell Alkaline Batteries (Included)
NOTE: Light sensor only allows Motion Sensing LED Spotlight to activate in
darkness. We recommend you test in a dark room or closet.
1. Remove front cover of Motion Sensing LED
Spotlight by rotating counter-clockwise.
2. Pull face out from cup to reveal
battery holder as shown.
3. Remove battery door and insert 3 D-Cell
batteries. Use only new alkaline or lithium
D-Cell batteries with a 1.5V Rating. Do not
mix old and new batteries. Install batteries
with polarity in correct position as shown.
Replace battery door. Light will turn on and
stay on as long as there is motion.
4. Match arrows then turn clockwise. Make
sure unit is securely closed with arrow
pointing past the symbol to ensure
weather proof seal is tight.
5
service@801service.net
Installation
AFTER SALES SUPPORT
1 866 558 8096
Publicidad
Capítulos
Tabla de contenido
