Publicidad
Idiomas disponibles
Idiomas disponibles
Quick operation guide
2.11 - Winch : 900/1000 Kg. of maximum
load with automatic brake to stop the load.
2.12 - Cable : Steel DIN 3060. Quality 180
Kg/mm2 twist resistant. Cable diameter :
6 mm.
2.13 - Adjustable stabilizing feet with ruber
non-slip supports.
2.14 - Safety catches to anchor the legs.
3. SAFETY PRECAUTIONS.
PRO LIFTS S.L.
2.15 - Spirit level to adjust the tower ver-
tically.
2.16 - Base, legs, supports, forks are fi nis-
hed in satin polyester. The tower can be
supplied with natural aluminium fi nish or
black (version B).
2.17 - Swivel wheels to transport the lift
when folded.
3.1 - The HDT-08 is a machine designed to elevate
loads upwards in a vertical direction, It should NEVER
be used as a platform to elevate people.
3.2 - Only place the lift on hard, fl at surfaces always
checking that it is in a vertical position by using the bub-
ble level indicator found on the base section. Adjust the
outrigger stabilisers (Q) by turning the cranks to level if
necessary. NEVER use wedges or other foreign objects
to balance the lift.
3.3 - The maximum load indicated on the characteristics
label and the instructions manual should not be excee-
ded.
3.4 - This lift should NEVER be used to elevate a load
that has not been properly checked. It is necessary to
verify that the load is correctly supported and centred
on the appropriate lift support so that the weight of the
load will only elevate in a vertical direction.
Depósito legal y copyright 2013. Todos los derechos reservados.
ENGLISH
5
Publicidad
