Wireless Lan Access Point Connection; Getting Started - Conceptronic C54APM Manual De Inicio Rápido

ENGLISH
2

Wireless LAN Access Point Connection

1) Locate the best location for your Wireless LAN Access Point.
The best location for your Access Point is usually at the center of your wireless
network, with line of sight to all of your mobile stations.
2) Connect the Wireless LAN Access Point to your router, hub or switch.
Connect one end of the standard UTP cable to the Access Point's LAN Port and
connect the other end of the cable to a switch
then be connected to your existed wired LAN Network.
3) Connect the DC Power Adapter to the Wireless LAN Access oint's Power
Socket.
Only use the power adapter supplied w
may damage the produ
3 Wireless LAN Ac
3.1 Getting S
This Access Point is providing a web-based configuration tool allowing you to
configur e the Access Point from wired or wireless stations. Follow the instructions
below to start with the configuration.
From Wir ed Station
Make sure y our wired station is in the
The de fault IP Address and Sub Mask of the Access Point is:
Defaul P A t I ddress: 10.0.0.1
Default Sub net: 255.0.0.0
Configure your PC to be in the same subnet with the Access Point
1a) Windows 95/98/Me
1 Click the Start button and select Settings, then click Control Panel. The Control Panel
window will appear.
2 Double-click Network icon. The Network window will appear.
3 Check your list of Network Components. If TCP/IP is not installed, click the Add button
to install it now. If TCP/IP is installed, go to step 6.
ct.
cess Point Configuration
tarted
same subnet with the Access Point.
, a router or a hub.
ith the Access Point. Using a different adapter
31
The Access Point will
P
.