Basic Operation; Standby Mode; Radio Mode - HAEGER Snoozer RA-06B.005B Manual De Instrucciones

English
Battery acid could leak out, especially if the batteries are old. Therefore
you should remove all batteries if you do not plan to use the radio for
long periods of time. This protects the radio from battery acid leakage.

BASIC OPERATION

STANDBY MODE

After connecting the power supply, the unit is in standby mode and the clock time
0:00
will flash. Please refer to "CLOCK AND ALARM TIME SETTING" to set the time.
Press RADIO ON/OFF (1) button to turn on the unit to power on / radio mode or press
it again to go back to the standby mode.

RADIO MODE

Press RADIO ON/OFF (1) button to switch on the unit, the current radio frequency
appears on the display for about 5 seconds, after which the current time indication
returns to the display.
CLOCK AND ALARM TIME SETTING
CLOCK TIME SETTING
In standby mode,
1. Press and hold SET (9) button for about 2 seconds until
the hour and minute digits blink.
2. Press HR (6) button to set the hours.
3. Press MIN (7) button to set the minutes.
4. Press SET (9) button again to confirm the clock time
setting (hour and minute digits will become solid when finished).
ALARM 1 TIME SETTING
In standby mode,
1. Press and hold AL1 (3) button for about 2 seconds until the hour and minute
digits blink.
2. Press HR (6) button to set the hours.
3. Press MIN (7) button to set the minutes.
4. Press AL1 (3) button again to confirm the alarm 1 time setting (current time
indication returns to the display when finished).
4 Instructions for use