Work Pro PAR 56 ECO Manual De Uso

1) Todos los tornillos usados en la instalación del dispositivo deben estar firmemente apretados y
no corroidos.
2) No debe haber deformaciones en el chasis, fijaciones o en el lugar de instalación (techos, estructura, etc.)
3) Los cables de red no deben mostrar daños, fatiga de materiales, cables porosos o sedimentos.
En caso de detectar cualquiera de estos problemas debe ser corregido por un técnico experto.
PELIGRO Desconecte de la red antes de realizar el mantenimiento de la unidad.
Le recomendamos una limpieza frecuente del dispositivo. Use un paño libre de hilo ligeramente húmedo
Nunca use alcohol o disolventes.
El interior del dispositivo debe ser limpiado anualmente usando un aspirador.
No hay elementos de control dentro de la unidad excepto la lámpara. El mantenimiento y reparación
debe ser llevada a cabo por personal autorizado.
Tenga en cuenta las instrucciones de la sección "Instalación y sustitución de la lámpara".
Si necesita un repuesto, utilice repuestos originales.
Si el cable de red se daña debe ser sustituido por personal autorizado para evitar riesgos.
Ante cualquier duda, consulte a su distribuidor.
ESPECIFICACIONES TECNICAS
Alimentación:
Consumo, Max.
Dimensiones (L x An x Pr);
Peso:
Portalámparas
Maxima temperatura ambiente T
Maxima temperatura del chasis T
Distancia minima:
Este símbolo en su equipo o embalaje, indica que el presente producto
no puede ser tratado como residuos domésticos normales, sino que deben
entregarse en el correspondiente punto de recogida de equipos electrónicos
y eléctricos. Asegurándose de que este producto es desechado
correctamente, Ud. está ayudando a prevenir las consecuencias negativas
para el medio ambiente y la salud humana que podrían derivarse de la
incorrecta manipulación de este producto. EL reciclaje de materiales
ayuda a conservar las reservas naturales. Para recibir más información,
sobre el reciclaje de este producto, contacte con su ayuntamiento, su
punto de recogida más cercano o el distribuidor donde adquirió el producto.
PAR 56 ECO User Manual/Manual de uso
AC 230-240V
500W
205 x 205 x 250mm
1.0 kg
230-240V/300W/500W PAR56 Base:GX16d
: 25°C
a
B B
: 140°C
S
B B
2m
Pag 8
PAR 56 ECO
USER MANUAL
SAFETY INSTRUCTIONS
? CAUTION! Keep this device away from rain and moisture!
? CAUTION! Be careful with your operations. With a dangerous voltage you can suffer a dangerous
electric shock when touching the wires!
? This device has left our premises in absolutely perfect condition. In order to maintain this condition and
to ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and
warning notes written in this user manual.
? Important: Damages caused by the disregard of this user manual are not subject to warranty. The
dealer will not accept liability for any resulting defects or problems.
? Keep away from heaters and other heating sources!
? If the device has been exposed to drastic temperature fluctuation (e.g. After transportation), do not
switch it on immediately. The arising condensati on water might damage your device. Leave the device
switched off until it has reached room temperature.
? This device falls under protection-class I, therefore it is essential that the yellow/green conductor gets
connected to earth. The electric connection must be carried out by a qualified employee.
? Make sure that the power-cord is never crimped or damaged by sharp edges. Check the device and
the power-cord from time to time.
? If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the
manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
? Shields, lenses or ultraviolet screens shall be changed if they have become visibly damaged to such
an extent that their effectiveness is impaired, for example by cracks or deep scratches.
? Never let the power-cord come into contact with other cables! Handle the power-cord and all
connections with the mains with particular caution!
? Make sure that the available voltage is not higher than stated in this manual.
? Always disconnect from the mains, when the device is not in use or before cleaning it. Only handle the
power-cord by the plug. Never pull out the plug by tugging the power-cord.
? During the initial start-up some smoke or smell may arise. This is a normal process and does not
necessarily mean that the device is defective.
? DANGER OF BURNING! Never touch the device during the operation! The housing heats up to the
housing temperature T .
SURFACE
B B
? Don't switch the device on and off in short intervals as this would reduce the lamp's life.
? HEALTH HAZARD! Never look directly into the light source, as sensitive persons may suffer an
epileptic shock (especially meant for epileptics)!
? Please note that damages caused by manual modifications on the device or unauthorized operation by
unqualified persons are not subject to warranty.
? Keep away children and amateurs from the device!
? There are no serviceable parts inside the device. Maintenance and service operations are only to be
carried out by authorized dealers.
OPERATING DETERMINATIONS
? This device is a spot designed for professional use on stages, in discotheques, theatres etc. this fixture
is only allowed to be operated with an alternation current of max. 230V/50Hz 300W and was designed
for indoor use only.
? L ighting effects are not designed for permanent operation. Consistent operation breaks will ensure that
U
the device will serve you for a long time without defects.
? Do not shake the device. Avoid brute force when installing or operation the device.
? When choosing the installation-spot, please make sure that the device is not exposed to extreme heat,
moisture or dust. There should not be any cables lying around. You endanger your own and the safety
of others!
PAR 56 ECO User Manual/Manual de uso
U
Pag 1