Voltage Measurement; Current Measurement - Velleman DVM9915 Manual Del Usuario

9.9 DUTY CYCLE
range
0.1-99.9 %
Frequency: < 10 kHz
Sensitivity: sine wave 0.6 V rms
Overload protection: 600 V DC or AC rms
9.10 TEMPERATURE
range
°C
NiCr-NiSi sensor
Overload protection: 0.5 A/600 V fuse

10. Voltage Measurement

Do not measure circuits that may contain voltages > 600 V
Use extreme caution when measuring voltages higher than 60 VDC
or 30 VAC rms.
Always place your fingers behind the protective edges of the test
probes while measuring!
1. Connect the red test lead to the "VmA" jack and the black lead to the
"COM" jack.
2. Set the rotary switch in the desired V
3. Press "SELECT" and choose the "AC" or "DC" measurement mode.
4. Connect the test leads to the source being measured.
5. Read the voltage value on the LCD display.
6. In "AC" measurement mode, press "Hz%" to measure frequency or
duty cycle.

11. Current Measurement

Do not measure circuits that may contain voltages > 600 V
Use extreme caution when measuring voltages higher than 60 VDC
or 30 VAC rms.
Always place your fingers behind the protective edges of the test
probes while measuring!
V. 03 – 29/11/2017
DVM9915
Do not conduct duty cycle measurements on live
± (2.0 % rdg + 2 digits)
accuracy
-50 to 150 °C
150 to 800 °C
circuits
accuracy
± (3 °C + 1 digit)
± (3 % + 1 digit)
position.
12
resolution
1 °C
©Velleman nv