Working In Safety; Technical Data; General Description - IMER C 350 i-Power Manual De Uso, Mantenimiento Y Repuestos

Dear Customer,
Congratulations on your purchase: your IMER saw, the result of years of
experience, offers maximum reliability and features the latest technical
innovations.
.

- WORKING IN SAFETY

To ensure safety, read the following instructions carefully.
To work in complete safety, read the following instructions carefully
before using the machine.
The manual is considered part of the machine and must be kept for
future reference (EN 12100-2) until scrapping of the machine itself.
Should the manual be lost or damaged, a copy can be ordered from
the manufacturer.
The manual contains important information regarding site preparation,
machine use, maintenance procedures, and requests for spare parts.
Nevertheless, the installer and the operator must both have adequate
experience and knowledge of the machine prior to use. In order to ensure
operator safety, safe operation and long service life, all instructions in
this manual must be observed, together with the requirements of current
legislation governing work safety (use of safety footwear and adequate
clothing, use of helmets, gloves, goggles etc.).
- Make sure that all signs are legible.
- It is strictly forbidden to carry out any form of modifi cation to
the steel structure or working parts of the machine.
IMER INTERNATIONAL declines all responsibility for failure to comply
with laws and standards governing the use of this equipment, in
particular; improper use, defective power supply, lack of maintenance,
unauthorised modifi cations, and partial or total failure to observe the
instructions contained in this manual.
IMER INTERNATIONAL reserves the right to modify features of the saw
and contents of this manual, without the obligation to update previous
machines and/or manuals.

1. TECHNICAL DATA

Technical data are stated in table 1 and electrical specifi cations in table
2.
Table 1 - TECHNICAL DATA
Model
Max. blade diameter
Diamond Blade hole diameter
Single phase 230V/50Hz motor power
Max. blade rotation speed (230V/50HZ)
Cutting table dimensions
Length of 90° cuts (thickness= 10mm)
Maximum cutting depth of dia. 350 disc with 1-2
passes
Water pump fl ow rate
Water tank capacity
Machine dimensions
Packed machine dimensions
Weight with packaging
IMER INTERNATIONAL S.p.A.
C 350 iPower
2. DESIGN AND CONSTRUCTION STANDARDS
C 350 iPower saws have been designed and manufactured according
to the following standards: UNI EN 12418:2001; EN 12100-1/2:2005;
EN 60204-1:2006.
3. NOISE LEVEL AND VIBRATIONS
Table 3 gives the sound pressure level of the machine measured at
the ear of the operator when running under no load (L
transmitted when it is operating.
4. GENERAL DESCRIPTION OF SAW

4.1 General description

The C 350 iPower sawing machine is composed of a frame (Fig.1,
Ref.A)
Ref.C) is mounted on a carriage and can move vertically and horizontally
along a rigid aluminium section The aluminium section is hinged on two
arms (Fig.1, Ref.D ) and the whole assembly can rotate 45° (fi g.2) by
loosening the handwheels (Fig.2,Ref.A).
The sawing machine is fi tted with a blade guard (Fig.1, Ref.E) to
guarantee optimal safety during operation and to protect the user during
cutting cycles.
Ref.G) for making cuts at different angles.
tank (Fig.1, Ref.G) is mounted under the frame. The immersion water
C 350 iPower
pump (Fig.1, Ref.H) is housed inside the tank and supplies water to
350 mm
the nozzles (Fig.3, Ref.A) mounted on the blade guard which cool the
25,4 mm
disc during cutting. A valve (Fig.3, Ref.B) is mounted above the blade
2.5 kW
guard to adjust the fl ow rate of water delivered to the cutting
2036 rpm
machine is equipped with a laser pointer that marks the cutting line on
1390 x 696 mm the workpiece (Fig.3,Ref.C).
1050 mm
4.2 Workable materials
120/250mm
The sawing machine has been designed for cutting the following
materials: ceramic, stone materials, marble, granite, brick and stone,
10 L/1'
cement and similar products of maximum size compatible with the
40 L
lengths, cutting depths and dimensions of the table, given in Table 1.
760 x1746 /H 1535 mm
Maximum weight of workable materials: 35 kg.
746 x 1770 /H 1080 mm
113 (133) Kg
10
Table 2
Specifi cations
Power (kW)
Rated voltage (V)
Frequency (Hz)
Absorbed current(A)
Number of poles
Motor speed (rpm)
Service type
Insulation class
Protection class
Capacitor (μF)
Table 3
Model Type of motor
C 350 iPower Electric
supported by folding legs (Fig.1, Ref.B).
Located on the cutting table is the protractor (Fig.1,
GB
Motor (230V/50Hz) (220V/60Hz)
2.5
220/230
50/60
15
2
2800 (50Hz)
3400 (60Hz)
S6 40%
F
IP55
60 (Ø 95x55)
) and vibrations
pA
L A
pA eq
86 dB 2.63 m/s
2
The cutting head (Fig.1,
A plastic impact-resistant
blade. The