Removing/Fitting The Controller - Alpine EZi-DAB Manual Del Usuario

Removing/fitting the controller

The controller can be fi tted and removed easily for security purposes. Your installation may also use a
swivel bracket or some sort of universal or model-specifi c mounting bracket onto which the controller
bracket shown is mounted – if so, take extra care when removing or fi tting the controller.
Removing the controller
Hold the bracket and pull the controller fi rmly up by the sides to remove it.
If EZi-DAB is switched on when you remove the controller it will continue radio or track playback until you
replace and stop playback, turn off EZi-DAB or turn off your ignition.
Note: We recommend that you remove the controller from your car (or store out of direct sunlight) on
hot/sunny days if your vehicle is to be left unattended, as temperatures inside a closed vehicle
can get very high.
Fitting the controller
Slide the controller onto the mounting bracket as shown and click in to place.
Removing the controller
Fitting the controller
EN
13