BaByliss CURL SECRET 2 Manual De Instrucciones página 8

• Select the accessory according to the type of curls desired:
• Always position or remove accessories before plugging the appliance
in and switching it on.
• To remove the accessory, press the two buttons on the two sides of the
accessory at the same time, using your thumb and index finger (FIG. 1).
• To position the accessory, place it onto the appliance head until it clicks
in.
• Plug in the appliance, switch on, and select the desired temperature
using the 0-I-II switch. See table below:
Temperature
Ø 35 mm
190°C
210°C
• The indicator light comes on and will start to flash.
• The indicator light will stop flashing when the appliance has heated
up to the selected temperature. The appliance is now ready to use; the
indicator light will stay on.
• Select the time setting depending on the desired curl effect. For loose
curls, select the minimum time setting. For tighter curls, select the
maximum time setting. Please refer to the table below:
8 seconds (Ø 35 mm)
10 seconds (Ø 25 mm)
10 seconds (Ø 35 mm)
12 seconds (Ø 25 mm)
12 seconds (Ø 35 mm)
14 seconds (Ø 25 mm)
• Select the adjustment of the direction of the curl, according to the
desired result:
RC-16_C1300E-no tool_IB.indd 8
- 25 mm: tight curls
- 35 mm: volume and larger curls
Temperature
Ø 25 mm
(I): (I):
210°C
(II): (II):
230°C
Time
Fine, bleached, and/or
damaged hair
Normal hair, thick and
wavy, or dyed
Audio beep indicator
3 beeps (Ø 35 mm)
4 beeps (Ø 25 mm)
4 beeps (Ø 35 mm)
5 beeps (Ø 25 mm)
5 beeps (Ø 35 mm)
6 beeps (Ø 25 mm)
8
Hair type
Curl effect
Loose waves
Soft curls
Defined curls
18/08/16 09:09