Programming Chases - HQ-Power VDPC145 Manual Del Usuario

g) Copying a Bank
1. Select the desired bank.
2. Press the MIDI/ADD button.
3. Select the bank you wish to copy with ▲ or ▼.
4. Press the MUSIC/BANKCOPY button.
h) Deleting a Bank
1. Select the bank to be deleted.
2. Press AUTO/DEL and MUSIC/BANKCOPY buttons simultaneously.

Programming Chases

Hold the PROGRAM button for 2 seconds to activate the programming mode. The programming LED will start to
flash. One chase can contain up to 240 scenes and the scenes are run in the programmed order. The first scenes to
be run will be the first that were programmed.
a) Programming a Chase
1. Select a chase containing programmed scenes by pressing the appropriate CHASE button.
2. Select a scene from a bank with ▲ or ▼ and press the corresponding SCENE button.
3. Press the MIDI/ADD button.
b) Copying all Scenes from a Bank to a Chase
1. Select the desired bank with ▲ or ▼.
2. Press the MUSIC/BANKCOPY button.
3. Press the MIDI/ADD button.
c) Adding a Step to a Chase
Example : inserting a scene as step 10 in an existing 15-step chase.
1. Press TAPSYNC/DISPLAY to display the CHASE and its STEP on the LCD.
2. Select STEP 9 with ▲ or ▼.
3. Press MIDI/ADD, making the step turn to 10.
4. Select a scene from the bank with ▲ or ▼ and then press the corresponding SCENE button.
5. Press MIDI/REC to add the new scene to the newly inserted step. The previous step 10 becomes step 11, etc..
d) Deleting a Step from a Chase
Example : deleting step 10.
1. Press TAPSYNC/DISPLAY to display the CHASE and its STEP on the LCD.
2. Select step 10 with ▲ or ▼.
3. Press AUTO/DEL : step 11 becomes step 10, step 12 becomes step 11, etc.
e) Deleting a Chase
1. Select the desired chase with the CHASE button.
2. Press AUTO/DEL while holding that CHASE button.
VDPC145_v2 6 VELLEMAN